Reasons to use orbital welding machine

There are many reasons to use an orbital stainless steel pipe welder. It is the ability to deliver high-quality results, repeatable uniform welds at speeds close to full welding speed for the benefit of the user. Find out with LKS 360 in the following article

 

Why you should use Orbital welding equipment

 

1. Productivity: The orbital welding machine system will perform faster and more powerfully than manual welding, the cost is also many times more economical for stainless steel pipe welding.

2. Quality: The quality of the welds produced by the orbital pipe welding system adjusted by the automatic welding program will yield higher quality results than manual welding. In applications such as semiconductors and pharmaceuticals, orbital tube welding is the only method that provides the most satisfactory welds.

 

3. Uniformity: As soon as the welding program is established, the orbital welding system will repeat the welding performance of hundreds of identical welds. Eliminate common errors such as variations, inconsistencies, errors and defects of manual soldering.

 

 

4. Skilled Worker: It is difficult to get a highly certified welder. With orbital welding equipment you will not need a special skilled welder. All you need is a welder who has learned the basics and attended some 3N company training.

 

Orbital welding is used in applications where the tube (tube or pipe) to be welded cannot be rotated or the position to rotate the part is not feasible.

 

Orbital welding is also used in situations where the access space is limited, which limits the size of the hand-feeding equipment. Orbital welding heads can be used to weld tube beams in boilers where it is difficult to hand weld with a torch and the weld is difficult to see.

 

There are many other reasons for the existence of automatic pipe welding equipment compared to manual welding. For example, applications where quality inspection of the inside of the weld is not possible for each weld created. At that time you will choose an automatic pipe welding machine with orbital technology. By examining a group of sample welds, if achieved, it is considered acceptable. Since successive welds are produced by the automatic welding equipment with the same parameter inputs, the same quality results will be obtained.